INCRA MITER 3000SE + EXPRESS SLED + EXTRA DROP-OFF PANEL - MINT - FAST SHIPPING!

Description

INCRA MITER 3000SE + EXPRESS SLED + EXTRA DROP-OFF PANEL - MINT - FAST SHIPPING!
The Miter 3000 Special Edition
builds on the outstanding platform provided by the Miter 3000. The INCRA exclusive AngleLOCK Indexing System delivers 364 lock solid angle stops in 5 degrees, 1 degree and 1/2 degrees increments over a full 180 degrees range with continuous adjustability between all 1/2 degrees settings. Combine this with the included GlideLOCK Miter Bar,
Telescoping IncraLOCK Cut-off Fence
and the
INCRA Flip Shop Stop
, and you'll easily achieve mitering accuracy that you never thought possible. The Miter 3000SE by INCRA delivers perfect, repeatable accuracy.
First time - Every time - Any angle
GlideLOCK Miter Bar
The expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws with standard 3/4" x 3/8" or near-standard miter gauge channels, including Delta, Craftsman, imports, etc. This means that all of INCRA's incredible precision will actually show up in your work because the bar CAN'T wiggle around in the miter slot. The miter bar's adjustment range accommodates actual slot widths between 0.740" and 0.765".
The INCRA Flip Fence
The 27" Flip Fence and Flip Shop Stop are standard equipment. INCRA's patented incremental positioning mechanics give perfect accuracy and repeatability to the length of your cross cuts, and the fence's front T-slot makes it easy to attach a woodend zero-clearance sub fence. A screw-based micro adjust is built right in, and the Flip Shop Stop even has an expandable body to cover sub fences up to 3/4" thick.
AngleLOCK Indexing
Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2 degrees, 1 degree or 5 degrees increments over a full 180 degrees range. it's also continuously adjustable between 1/2 degrees steps.
INCRA Miter 3000se Features:
- 364 Indexed Stops in 5 Degrees, 1 Degree and 1/2 Degrees Steps
- New Extender-Bar Fence Telescopes from 27" to 49"
- GlideLOCK Miter Bar Adjusts to Fit Any Standard Table Saw
- INCRA Flip Shop Stop Positioner
- Indexing Every 1/2 Degrees Plus Continuous Adjustment Between 1/2 Degrees Steps
INCRA's Miter Express
offers any miter gauge owner the safest and most accurate cross-cutting platform available. Miter gauge & fence sold separately; use the Miter Express with ANY standard miter gauge! Available for traditional 3/4” x 3/8” miter slots and Shopsmith machines. Shown above with an optional
INCRA Miter 1000SE
mounted and ready, the Express features 2 embedded T-Slot channels to secure the included Hold Down Clamp and Outboard Fence Support. These slots are also invaluable for mounting your own custom Jigs and Fixtures.
The advantages are simple: The
Miter Express
doubles your miter gauge's capacity for cutting large panels, it offers more hold down options for greater safety when cutting small parts, and it provides better control overall because the lumber is carried through the blade instead of pushed across the saw.
The Express assembles quickly on either side of the saw blade, and the panels are custom-fit to your saw with two quick cuts and no measuring or alignment. It couldn't be easier! The sliding main panel and locking drop-off panel provide a level surface and perfect zero-clearance tearout control on both sides of the blade.
Doubles Any Miter Gauge's Crosscut Capacity to 24" and Securely Holds Even the Smallest Workpieces for Safe Accurate Cuts
The crosscut capacity of any miter gauge is safely doubled to more than 24" when docked on top of the Miter Express. For these extra-large crosscuts, the non-drag support provided by the sliding panel, along with the extra holding power of the included
Hold Down Clamp
adds much needed stability and control. As shown on the right, the same INCRA Hold Down Clamp also keeps your fingers comfortably away from the blade when cutting workpieces that are too small to safely hold by hand.
The Miter Express also includes an Outboard Fence Support that locks behind your fence in one of the two T-Slots, providing even more rigidity for all operations.
Assembles easily and 2 cuts give you zero clearance forever
The sliding main panel and the locking drop-off support panel are each trimmed with one simple cut during assembly for a perfect fit on YOUR table saw. The result is true Zero-Clearance Tearout Control on BOTH sides of the blade. The Miter Express is instantly removable from your saw table when making rip cuts or other operations that don't require a sled. And thanks to INCRA's quick release feature, your miter gauge undocks from the Express in seconds whenever you want to use your gauge on another tool such as a router table or sanding station.
T-Slot Retaining Clips & Adjustable Miter Bar
The Miter Express features a miter bar that's conveniently adjustable from above for a perfect fit in the miter slots of either traditional 3/4" x 3/8" or Shopsmith sizes.
It also features removable front and rear T-Slot Retaining Clips for sled stability at both the beginning and end of long crosscuts. The clips allow the Express to support itself as it's drawn back from the blade to simplify loading large panels.
INCRA Miter Express Features:
- Doubles Any Miter Gauge's Crosscut Range Up to 24"
- Safely Handles Both Extra Large and Extra Small Workpieces
- Eliminates All Side Play Between Table Saw's Miter Slot and Any Miter gauge
- Dual Embedded T-Tracks Secure the Included INCRA Hold-down Clamp and Other Mitering Accessories
- Eliminates All Drag Between Workpiece and Table Saw, ESPECIALLY for Extra Large Workpieces Superb Crosscut & Mitering Control
INCRA Miter Express Compatibility:
-
Miter slot size:
The miter bar's adjustment range accommodates actual slot widths between 0.740" and 0.762" and is designed for 3/4" wide x 3/8" deep square-sided miter slots, with or without a 15/16" T-slot at the bottom.
-
Miter slot spacing:
The max distance between the miter slots is 14" center-to-center.
-
Table size:
Note:  Many portable or jobsite table saws are too narrow for the Miter Express. For adequate support to the sides, the Miter Express needs a minimum of 8" measuring from the left-hand miter slot outward to the left edge of the saw table if the main sled will be to the left of the blade, or at least 8" from the right-hand miter slot to the outer right edge of the saw (sled can be installed on either side of the blade).
Mint condition + extra drop off panel for setup on left side of blade